7/25/2008

Catalyzer-What is it?

5 comments
My previous post is pointing about Yamaha 125 Z 1st design. And I'd mentioned that it was produced with catalyzer exhaust system. Also the all new brand Yamaha RXZ, began using the catalyzer exhaust system since year 2004 and Yamaha 135LC on 2006. So, I'm going to describe and giving you some info, what catalyzer is all about. Below is the picture of RXZ catalyzer exhaust.Before you know about catalyzer, you should know what is catalysis actually. So let's take a look at the article below, quoted from Wikipedia.

Catalysis is the process in which the rate of a chemical reaction is increased by means of a chemical substance known as a catalyst. Unlike other reagents that participate in the chemical reaction, a catalyst is not consumed. Thus, the catalyst may participate in multiple chemical transformations, although in practice catalysts are sometimes consumed in secondary processes.

Background

The production of most industrially important chemicals involves catalysis. Research into catalysis is a major field in applied science and involves many areas of chemistry, notably in organometallic chemistry, and materials science. Catalysis is important in many aspects of environmental science, from the catalytic converter in automobiles to the causes of the ozone hole. Catalytic reactions are preferred in environmentally friendly green chemistry due to the reduced amount of waste generated,[1] as opposed to stoichiometric reactions in which all reactants are consumed and more side products are formed. The most common catalyst is the proton (H+). Many transition metals and transition metal complexes are used in catalysis as well.

A catalyst works by providing an alternative reaction pathway to the reaction product. The rate of the reaction is increased as this alternative route has a lower activation energy than the reaction route not mediated by the catalyst. The disproportionation of hydrogen peroxide to give water and oxygen is a reaction that is strongly affected by catalysts:

2 H2O2 → 2 H2O + O2

This reaction is favoured in the sense that reaction products are more stable than the starting material, however the uncatalysed reaction is slow. The decomposition of hydrogen peroxide is in fact so slow that hydrogen peroxide solutions are commercially available. Upon the addition of a small amount of manganese dioxide, the hydrogen peroxide rapidly reacts according to the above equation. This effect is readily seen by the effervescence of oxygen.[2] The manganese dioxide may be recovered unchanged, and re-used indefinitely, and thus is not consumed in the reaction. Accordingly, manganese dioxide catalyses this reaction.[3]

General principles of catalysis

Typical mechanism

Main article: catalytic cycle

Catalysts generally react with one or more reactants to form an intermediate that subsequently give the final reaction product, in the process regenerating the catalyst. The following is a typical reaction scheme, where C represents the catalyst, A and B are reactants, and D is the product of the reaction of A and B:

A + C → AC (1)
B + AC → ABC (2)
ABCCD (3)
CD → C + D (4)

Although the catalyst is consumed by reaction 1, it is subsequently produced by reaction 4, so for the overall reaction:

A + B → D

As a catalyst is regenerated in a reaction, often only small amounts are needed to increase the rate of the reaction. In practice, however, catalysts are sometimes consumed in secondary processes.

Catalysis and reaction energetics

Generic potential energy diagram showing the effect of a catalyst in an hypothetical exothermic chemical reaction. The presence of the catalyst opens a different reaction pathway (shown in red) with a lower activation energy. The final result and the overall thermodynamics are the same.

Catalysts work by providing an (alternative) mechanism involving a different transition state and lower activation energy. The effect of this is that more molecular collisions have the energy needed to reach the transition state. Hence, catalysts can perform reactions that, albeit thermodynamically feasible, would not run without the presence of a catalyst, or perform them much faster, more specific, or at lower temperatures. This can be observed on a Boltzmann distribution and energy profile diagram. This means that catalysts reduce the amount of energy needed to start a chemical reaction.

Catalysts do not change the favorableness of a reaction: they have no effect on the chemical equilibrium of a reaction because the rate of both the forward and the reverse reaction are both affected (see also thermodynamics). The net free energy change of a reaction is the same whether a catalyst is used or not; the catalyst just makes it easier to activate.

The SI derived unit for measuring the catalytic activity of a catalyst is the katal, which is moles per second. The activity of a catalyst can also be described by the turn over number (or TON) and the catalytic efficiency by the turn over frequency (TOF). The biochemical equivalent is the enzyme unit. For more information on the efficiency of enzymatic catalysis see the Enzyme#Kinetics section.

Factors that affect catalytic rates

Catalysis manifests itself in accelerated rates of reactions, and thus many catalytic systems are analyzed with attention to how those rates are affected, beyond the usual parameters that affect all reactions, e.g. temperature, pressure, and concentration. In autocatalysis, a reaction produces catalysts, thus the rates of reactions subject to autocatalysis accelerate with time.

Some molecules inhibit catalysis by competing for the active sites. The strongest inhibitors are called poisons. Many catalysts used in petrochemical applications lose activity due to poisoning. Such catalysts are regenerated and reused multiple times to save costs and energy and to reduce environmental impact from disposal of spent catalysts.

In "product inhibition," the rate of catalysis is slowed by the presence of products. When the equilibrium constant for a reaction is very high, however, rates can appear unaffected by the presence of products. In the catalytic hydrogenation of alkenes, for example, one does not observe inhibition by alkanes.

Typical catalytic materials

The chemical nature of catalysts is as diverse as catalysis itself, although some generalizations can be made. Proton acids are probably the most widely used catalysts, especially for the many reactions involving water, including hydrolyses and its reverse. Multifunctional solids often are catalytically active, e.g. zeolites, alumina, certain forms of graphitic carbon. Transition metals are often used to catalyse redox reactions (oxidation, hydrogenation). Many catalytic processes, especially those involving hydrogen, require platinum metals.

Some so-called catalysts are really "precatalysts." Precatalysts convert to catalysts in the reaction. For example, Wilkinson's catalyst RhCl(PPh3)3 loses one triphenylphosphine ligand before entering the true catalytic cycle. Precatalysts are easier to store but are easily activated in situ. Because of this preactivation step, many catalytic reactions involve an induction period.

Types of catalysis

Catalysts can be either heterogeneous or homogeneous, depending on whether a catalyst exists in the same phase as the substrate. Biocatalysts are often seen as a separate group.

Heterogeneous catalysts

Heterogeneous catalysts are present in different phases from the reactants. Most heterogeneous catalysts are solids that act on substrates in a liquid or gaseous reaction mixture. Diverse mechanisms for reactions on surfaces are known, depending

on how the adsorption takes place (Langmuir-Hinshelwood and Eley-Rideal).[4]

For example, in the Haber process, finely divided iron serves as a catalyst for the synthesis of ammonia from nitrogen and hydrogen. The reacting gases adsorb onto "active sites" on the iron particles. Once adsorbed, the bonds within the reacting molecules are weakened, and new bonds between the resulting fragments form in part due to their close proximity. In this way the particularly strong triple bond in nitrogen is weakened and the hydrogen and nitrogen atoms combine faster than would be the case in the gas phase, so the rate of reaction increases.

Heterogeneous catalysts are typically “supported,” which means that the catalyst is dispersed on a second material that enhances the effectiveness o

r minimizes their cost. Sometimes the support is merely a surface upon which the catalyst is spread to increase the surface area. More often, the support and the catalyst interact, affecting the catalytic reaction.


Heterogeneous catalysts are often "supported" on complex structures to maximize surface area.

Electrocatalysts

In the context of electrochemistry, specifically in fuel cell engineering, various metal-containing catalysts are used to enhance the rates of the half reactions that comprise the fuel cell. One common type of fuel cell electrocatalyst is based upon nanoparticles of platinum that are supported on slightly larger carbon particles. When this platinum electrocatalyst is in contact with one of the electrodes in a fuel cell, it increases the rate of oxygen reduction to water (or hydroxide or hydrogen peroxide).

Homogeneous catalysts

Main article: Homogeneous catalysis

Homogeneous catalysts function in the same phase as the reactants, but the mechanistic principles invoked in heterogeneous catalysis are generally applicable. Typically homogeneous catalysts are dissolved in a solvent with the substrates. One example of homogeneous catalysis involves the influence of H+ on the esterification of esters, e.g. methyl acetate from acetic acid and methanol.[5] For inorganic chemists, homogeneous catalysis is often synonymous with organometallic catalysts.

Organocatalysis

Main article: Organocatalysis

Whereas transition metals sometimes attract most of the attention in the study of catalysis, organic molecules without metals can also possess catalytic properties. Typically, organic catalysts require a higher loading (or amount of catalyst per unit amount of reactant) than transition metal-based catalysts, but these catalysts are usually commercially available in bulk, helping to reduce costs. In the early 2000s, organocatalysts were considered "new generation" and are competitive to traditional metal-containing catalysts. Enzymatic reactions operate via the principles of organic catalysis.

Significance of catalysis

Estimates are that 90% of all commercially produced chemical products involve catalysts at some stage in the process of their manufacture.[6] In 2005, catalytic processes generated about $900 billion in products worldwide.(pdf) Catalysis is so pervasive that subareas are not readily classified. Some areas of particular concentration are surveyed below.

Energy processing

Petroleum refining makes intensive use of catalysis for alkylation, catalytic cracking (breaking long-chain hydrocarbons into smaller pieces), naphtha reforming, steam reforming (conversion of hydrocarbons into synthesis gas). Even the exhaust from the burning of fossil fuels are treated via catalysis: Catalytic converters, typically composed of platinum and rhodium, break down some of the more harmful byproducts of automobile exhaust.

2 CO + 2 NO → 2 CO2 + N2

With regards to synthetic fuels, an old but still important process is the Fischer-Tropsch synthesis of hydrocarbons from synthesis gas, which itself is processed via water-gas shift reactions, catalysed by iron. Biodiesel and related biofuels require processing via both inorganic and biocatalysts.

Fuel cells rely on catalysts for both the anodic and cathodic reactions.

Heavy chemicals

Some of the largest scale chemicals are produced via catalytic oxidation, often using oxygen. Examples include nitric acid (from ammonia), sulfuric acid (from sulfur dioxide to sulfur trioxide by the chamber process), terephthalic acid from p-xylene, and acrylonitrile from propane and ammonia.

Many other chemical products are generated by large-scale reduction, often via hydrogenation. The largest-scale example is ammonia, which is prepared via the Haber process from nitrogen. Methanol is prepared from carbon monoxide.

Bulk polymers derived from ethylene and propylene are often prepared via Ziegler-Natta catalysis. Polyesters, polyamides, and isocyanates via acid-base catalysis.

Most carbonylation processes require metal catalysts, examples include the Monsanto acetic acid process and hydroformylation.

Fine chemicals

Many fine chemicals are prepared via catalysis; methods include those of heavy industry as well as more specialized processes that would be prohibitively expensive on a large scale. Examples include olefin metathesis using Grubbs' catalyst, the Heck reaction, and Friedel-Crafts reactions.

Because most bioactive compounds are chiral, many pharmaceuticals are produced by enantioselective catalysis.

Food processing

One of the most obvious applicatoins of catalysis is the hydrogenation (reaction with hydrogen gas) of fats using nickel catalyst to give margarine.[7] Many other foodstuffs are prepared via biocatalysis (see below).

Biology

Main article: Biocatalysis

In nature, enzymes are catalysts in metabolism and catabolism. Most biocatalysts are protein-based, i.e. enzymes, but other classes of biomolecules also exhibit catalytic properties including abzymes, ribozymes, and synthetic deoxyribozymes.

Biocatalysts can be thought of as intermediate between homogenous and heterogeneous catalysts, although strictly speaking soluble enzymes are homogeneous catalysts and membrane-bound enzymes are heterogeneous. Several factors affect the activity of enzymes (and other catalysts) including temperature, pH, concentration of enzyme, substrate, and products. A particularly important reagent in enzymatic reactions is water, which is the product of many bond-forming reactions and a reactant in many bond-breaking processes.

Enzymes are employed to prepare many commodity chemicals including high-fructose corn syrup and acrylamide.

In the environment

Catalysis impacts the environment by increasing the efficiency of industrial processes, but catalysis also directly plays a direct role in the environment. A notable example is the catalytic role of Chlorine free radicals in the break down of ozone. These radicals are formed by the action of ultraviolet radiation on chlorofluorocarbons (CFCs).

Cl· + O3 → ClO· + O2
ClO· + O· → Cl· + O2

History

In a general sense, anything that increases the rate of any process is often called a "catalyst,"a term derived from Greek καταλύειν, meaning "to annul," or "to untie," or "to pick up." The phrase catalysed processes was coined by Jöns Jakob Berzelius in 1836[8] to describe reactions that are accelerated by substances that remain unchanged after the reaction. Other early chemists involved in catalysis were Alexander Mitscherlich who in 1831[citation needed] referred to contact processes and Johann Wolfgang Döbereiner who spoke of contact action and whose lighter based on hydrogen and a platinum sponge became a huge commercial success in the 1820’s. Humphrey Davy discovered the use of platinum in catalysis. In the 1880s, Wilhelm Ostwald at Leipzig University started a series of systematic investigations into reactions that were catalyzed by the presence of acids and bases, and found both that chemical reactions occur at finite rates, and that these rates can be used to determine the strengths of acids and bases. For this work, Ostwald was awarded the 1909 Nobel Prize in Chemistry.[9]

References

  1. ^ "The 12 Principles of Green Chemistry". United States Environmental Protection Agency. Retrieved on 2006-07-31.
  2. ^ "Genie in a Bottle". University of Minnesota (2005-03-02).
  3. ^ Masel, Richard I. “Chemical Kinetics and Catalysis” Wiley-Interscience, New York, 2001. ISBN 0471241970.
  4. ^ Helmut Knözinger, Karl Kochloefl “Heterogeneous Catalysis and Solid Catalysts” in Ullmann's Encyclopedia of Industrial Chemistry 2002, Wiley-VCH, Weinheim. doi:10.1002/14356007.a05_313. Article Online Posting Date: January 15, 2003
  5. ^ Arno Behr “Organometallic Compounds and Homogeneous Catalysis” Ullmann's Encyclopedia of Industrial Chemistry, 2002, Wiley-VCH, Weinheim. doi:10.1002/14356007.a18_215. Article Online Posting Date: June 15, 2000
  6. ^ "Recognizing the Best in Innovation: Breakthrough Catalyst". R&D Magazine, September 2005, pg 20.
  7. ^ "Types of catalysis". Chemguide. Retrieved on 2008-07-09.
  8. ^ K.J. Laidler and J.H. Meiser, Physical Chemistry, Benjamin/Cummings (1982), p.423
  9. ^ M.W. Roberts (2000). "Birth of the catalytic concept (1800-1900)". Catalysis Letters 67 (1): 1–4. doi:10.1023/A:1016622806065.

External links

Look up Catalysis in
Wiktionary, the free dictionary.
Read More...

7/23/2008

1st Yamaha 125 Z Design

1 comment
This time I would like to share a few picture of the 1st Yamaha 125 Z model. Yamaha 125Z is
underbone cub powered by 2 stroke 125cc Yamaha engine. Entering Malaysian market in early 1997,(forgive me if I'm mistaken) it got hot reception among Malaysian rider.It has top
of the range everything: originally 125cc high revving engine, Brembo duobloc brakes, catalyzer exhaust and aeorodynamic nice design so it fulfilled riders desire in it class. For the 1st edition, as you can see, it came out with non sport rim-with scale 17 inch rim. Despite of this blemish factor, it’s still have originally high revving engine makes it very familiar among youth of Malaysia. Unfortunately,they gone wild-racing at the road in the hustle bustle of the city even in the village! Not just racing, they also love to make show off and performance to show their skills such as burn out, wheelie, "whee-kang"(rear wheelie) and more dangerous trick. Then the title of "Mat Rempit" spread all over Malaysia. Mat Rempit refer to the riders who ride motorcycle rapidly, and in dangerous way. Ok, I'll tell you more bout it soon. Now look down below, the 1st design of Yamaha 125z. The 1st decal quite simple for me but still represent it's hot and powerful performance...
All this photos is credited to bikepics.com
Read More...

7/17/2008

Insistence

1 comment
Readers pressure made me a bit stress. They urged me to write something more specific
about any Yamaha (motorcycle) model coz they are really interested in Yamaha RXZ 135,
Yamaha 125 Z, Yamaha 135 LC, and Yamaha Ego. All this bike names refer to Malaysia due
to my most visitor come from Malaysia. Instead the pressure, I’m thankful for their response. It shows their loyalty, support to this blog :D Okay...then I'll start to post about it soon.
But I'm wondering where to start? Which model must I start with? Actually I'm facing problem to collect info from Malaysia coz I'm away from it now. Huh~ but I'll try my best. Mm..if anyone of you could help me to gather the info, oh thanks a lot dude. Feel free to share with me. Let's contribute for this blog...
Read More...

7/06/2008

Safety First!

3 comments
Hi, today i would talk about safety. Safety is still the most important thing that should be aware by anyone those assembling the vehicle. It is at this moment, when protection is indispensable. To avoid accidents and cases of unjustified, the quality of equipment and vehicles should be used.

In connection with motorists who need optimal security and protection to perform routine effectively. To achieve this goal, gear, accessories and motorcycle parts reliably be used. The driver of the motorcycle is exciting routine. It is not biker dude on other items. Nevertheless, drivers should be used as a protective shield in more detail at this motorcycle parts that are durable and reliable. The fact that the driver needs a helmet, trousers, boots, jackets gloves, and much more, motorcycle shops are now available via Internet access. They each driver has a one-stop shop for all their needs at affordable prices. Distance is not a disadvantage, because these stores offer delivery directly to your door. Most of them are dealers who serve in the Internet market motorcycle parts, services and accessories for Honda, Suzuki, Yamaha, Harley-Davidson, Kawasaki ", BMW, Triumph, Ducati and Cobra. It also gives valuable information for motorcycle enthusiasts.

Each driver has different styles and needs. Ryder may be a child or adult, amateur or professional, male or female. They prefer a different design, style, color and comfort when they are riding on their motorbikes. We call this difference individually. The difference results of individual and individual needs. To accommodate these different needs, a wide range of options should be available. This is not a problem. The motorcycle shops can be obtained. With just a click of a mouse, rider can buy everything you need.

There are other factors to drivers of motorcycles, which require the same attention as the weather conditions, road and the motorcycle itself. No one knows whether it would be rainy or sunny day, so you need to keep handy accessories to assist the cyclist in their difficult times. There are many motorcycles and accessories shops, which has built its name, and they have built in the consistency and accuracy. That is why we will win the overwhelming confidence of riders.

It is unwise to risk their lives, relying on unreliable animals. The quality of art and motorcycle parts, you enjoy a risk, and even more rugged trip!

Great discounts are also available for all fans on motorcycles. Now riders do not have to worry about the cost, since it is not necessary to make the price of hot parts of motorcycles superiority! As a conclusion, remember those who love you. So you would consider to remain safety aspect when riding.
Read More...